top of page
© Copyright

iCarsoft VOL V3.0 is a Professional and Powerful diagnostic tool for Volvo and Saab. With unique diagnostic software, it features full ECU diagnosis and test modes. Access vehicle-specific subsystem component test with the Actuation test / Bi-directory test. This new feature is only available on iCarsoft V3 scanners, it enables technicians to accurately diagnose complex problems.

iCarsoft VOL V3.0 supports multiple languages: English, German, Spanish, French, Dutch, Danish, Italian, Hungarian, Norwegian, Portuguese, Finnish, Swedish, Czech and Russian.


 

ICARSOFT VOL V3.0 SUPER ADVANTAGES

  • Diagnose Single Brand of most Models (OBDII-16DLC)

  • Full System Diagnosis

  • Read &Clear DTC          

  • Read Live Data

  • Activation Test

  • Oil Service Reset

  • Electronic Parking Brake (EPB) system maintenance

  • Battery Management System (BMS)

  • Diesel Particulate Filter (DPF) Regeneration Control System

  • Electronic Throttle Control System (ETC)

  • Steering Angle Sensor (SAS) Calibration

  • Battery Test    

  • Injector Coding

  • Adaption

  • Air Suspension 

  • Data Review and Print

  • Full Speed Upgrade via PC

  • 4.0″ TFT LCD, 480*320 Pixels



ICARSOFT VOL V3.0 FEATURES FOR VOLVO AND SAAB

Read and clear trouble codes: On most of the electronic systems such as engine, transmission, ABS, airbag etc.
Support OBDII/EOBD: (Ten Modes of Operation)
Full ECU Diagnosis
Oil Light / Service Reset
Electronic Parking Brake (EPB): System maintenance, deactivate and reactivate the EPB system for replacement and initialization.
Battery Management System (BMS): Register new battery to the BMS while battery replacement.
Diesel Particulate Filter (DPF): Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
ABS Bleeding: Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
Air Suspension: Reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off.
Electronic Throttle Control system (ETC): Relearn the throttle value while clear or replace the throttle valve.
Steering Angle Sensor (SAS): Calibrate the steering wheel to straight ahead, or recalibrate SAS while steering part replacement.
Head Lamp: Maintenance and other related operations (Including AFS setting), and then perform this function for calibration.
Engine ldle correction: Can be executed when the idle speed fault is resolved. Adjust the engine speed of the car at idle speed.
TPMS: Function include displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement lD and testing sensors.
Adaption function: Allows you to perform adaptive learning / reset / calibration and other functions for each control module. It includes some important module data for parameter adjustment such as Remote Control Adaptation.
Injector coding: Relearn the injector control parameter while the injector is renewed or replaced.
Actuation Test / Bidirectory Test: Used to access vehicle-specific subsystem and component tests.

 

Compatibility:

iCarsoft VOL V3.0 OBDII Function supports most of the OBDII/EOBD test modes including CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.


iCarsoft VOL V3.0 OBDII Function works on most of 2001 and later European OBDII compliant PETROL vehicles and most of 2004 and later European OBDII compliant DIESEL vehicles.


Applies to most of the Volvo and Saab models which equipped with OBDII-16 DLC. Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code. The iCarsoft VOL V3.0 scanner covers over 20 years of models, some functions may not be available on all years / models.


 

Coverage for Saab

Diagnostics for Saab
Battery Management System Saab
Engine Idle Saab
Electronic Throttle Control Saab
Electronic Parking Brake Saab
Fuel Saab
Injector Saab
Lamps Saab
Oil Service Saab
Steering Angle Sensor Saab
Tyre Pressure Management Saab


 

Coverage for Volvo

Diagnostics for Volvo
Bleeding function Volvo
Battery Management System Volvo
Diesel Particle Filter Volvo
Electronic Throttle Control Volvo
Injector Volvo
Lamps Volvo
Oil Service Volvo
Steering Angle Sensor Volvo
SPS Accelerometer Volvo
Tyre Pressure Management Volvo


 

ICARSOFT VOL V3.0 OBDII FUNCTION FOR ALL CAR BRANDS - OBDII Function for all OBDII cars, not only for Volvo and Saab.


 

Read Codes: Read generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) permanent and pending Diagnostic Trouble Codes.

Erase Codes: Erase generic and manufacturer specific Diagnostic Trouble Codes. 

Determine MIL: Turn off Check Engine Light (MIL) after clearing codes and reset monitors.

DataStream: Read live PCM DataStream. View & Graph Live Data in Colour Graphing and blazing fast refresh rate for better graphing and live data readings.

Freeze Frame Data: When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.

I/M Readiness Test: Indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.

O2 Sensor Test: This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.

Evap System Test: The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
Battery Test: Allows you getting the voltage of battery when the engine starts.

On-Board Monitoring: This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.

Vehicle Information: Displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the vehicle. 

Comprehensive Help: Including OBD Parameter, Mode Explanations, DTC search & More.

 

ICARSOFT VOL V3.0 CONTENTS

 

  • iCarsoft VOL V3.0 scan tool

  • TF card with diagnostic software for Volvo and Saab

  • OBDII cable

  • User manual

  • PC connecting cable

  • Nylon carry case

ICARSOFT VOL V3.0 Diagnostic Scanner - Volvo & Saab

SKU : ICARSOFT-VOL-V3.0
166,95£Prix
Quantité
  • *Compatibility where supported - Certain Service Functions may not be supported due to requiring Special Main Dealer access or protected by Manufacturer Copyright. In addition, the introduction of OTA (Over the Air Diagnostics) for newer vehicles means only the Main Dealer can carry out these functions over the Cloud (or Main Dealer supported Tools).

Articles similaires

bottom of page